ProForm PFEL39420 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included allen wrenches, assembly requires a phillips screwdriver , an adjustable

wrench , and a rubber mallet .

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Washer	M8 Washer				M10	M10.3 Black
(76)–4		(77)–2
					Washer (38)–4	Washer (53)–2
M10 Split	Frame Spacer (33)–1				M6 Nylon	M10 Nylon
					Locknut (59)–4	Locknut (29)–6
Washer (70)–4
M4 x 16mm			M8 x 19mm Button			M10 x 27mm
Screw (66)–2				Screw (22)–2		Screw (71)–3
M8 x 35mm Patch					M10 x 94mm Button Bolt (27)–2
Screw (47)–2
M6 x 54mm Bolt (75)–4					M10 x 88mm Button Bolt (63)–1
		M10 x 112mm Carriage Bolt (34)–4
					5