![](/images/new-backgrounds/1183199/1831999x1.webp)
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the | |||
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the | |||
included allen wrenches, assembly requires a phillips screwdriver | , an adjustable | ||
wrench | , and a rubber mallet | . |
|
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 20 and 21. The second number is the quantity needed for assembly. Note: Some small parts may have been
Star Washer | M8 Split | Wave Washer | M8 Washer |
Washer |
M8 Jamnut | M10 Nylon |
Locknut |
M4 x 14mm | M4 x 16mm |
| M4 x 32mm | M4 x 45mm | M6 x 20mm Button |
Round Head |
| Round Head | |||
Screw | Screw | Screw | Screw | Screw | |
Hub Screw | M8 x 23mm Shoulder | M8 x 23mm Button | M8 x 43mm Button | ||
|
| Screw | Screw | Bolt | |
| M8 x 69mm Button |
| M10 x 80mm Carriage | ||
| Bolt |
| Bolt |
M10 x 127mm Button Screw
5