ProForm PFEL8947.0 user manual

7. Position an Inner Handlebar Cover (18) and an	7
Outer Handlebar Cover (19) around the Left
Handlebar (8) as shown.
Attach the Inner and Outer Handlebar Covers		18	79
		8
(18, 19) with three M4 x 16mm Self-tapping
Screws (79) and an M4 x 13mm Washer (93).
Start all three Self-tapping Screws before
tightening them.	19
		79
Repeat this step for the Right Handlebar (not		93
shown).
8. Apply a generous amount of grease to the Pivot	8
Axle (65) and insert it into the Frame (2).			86
Attach the two Frame Covers (17) to the Frame	Grease
(2) with four M4 x 16mm Screws (86) as shown.
	65		17
	17
		2
	86
	8