ProForm PFEX20020 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench	and Phillips screw-
driver

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached.

M8 Nylon	M10 Black Nylon	M8 Black Split	M10 Split	M8 x 25mm Button
Locknut (10)-4	Locknut (34)-6	Washer (42)-7	Washer (46)-2	Screw (47)-3

M4 x 16mm	M10 x 42mm Button	M10 x 75mm Carriage Bolt (33)-4
Screw (32)-5	Bolt (6)-2

,Identify the Front Stabilizer (2). While another person lifts the front of the Frame (1) slightly, attach the Front Stabilizer to the Frame with two M10 x 75mm Carriage

Bolts (33) and two M10 Black Nylon Locknuts (34). 33

4