8.With the help of another person, carefully tip the exercise cycle onto its left side so it is resting on the Left Inner Handlebar (not shown).
Identify the Left Rear Stabilizer (16), which is marked with an “L” sticker. Attach the Left Rear Stabilizer and the Stabilizer Plate (87) to the Frame (1) with two M8 x 25mm Button Screws (40) as shown; do not tighten the Button Screws yet.
Insert the Right Rear Stabilizer (98) between the Stabilizer Plate (87) and the Frame (1). Attach the Right Rear Stabilizer with two M8 x 25mm Button Screws (40). Tighten all four Button Screws.
9.Refer to step 10. Remove the six M4 x 16mm Screws (57) and the Right and Left Handlebar Covers (5, 6) from the Console (4).
With the help of another person, carefully raise the exercise cycle so it is resting on the Front and Rear Stabilizers (not shown).
While another person holds the Console (4) in the position shown, connect the wire harness on the Console to the Upper Wire Harness (42). Insert the excess wire harness down into the Upright (2).
Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (57). Be careful to avoid pinching the wire harnesses.
10.Attach the CD Holder (104) to the Console (4) with two M4 x 12mm Screws (41) as shown.
Attach the Left Handlebar Cover (6) to the Console (4) with three M4 x 16mm Screws (57).
Attach the Right Handlebar Cover (5) to the Console (4) in the same way.
8 |
|
|
|
| 98 |
40 |
|
|
40 | 87 |
|
|
| |
| 16 | 1 |
9 |
|
|
57 |
| 4 |
|
| |
2 | 42 |
|
|
| |
|
| Wire |
|
| Harness |
10 | 104 |
|
|
| |
41 |
|
|
|
| 4 |
|
| 5 |
57 |
|
|
6 |
|
|
8
