ProForm PFHS60070 user manual Assembly

Models: PFHS60070

1 17
Download 17 pages 48.33 Kb
Page 8
Image 8

ASSEMBLY

Before beginning assembly, carefully read the following information and instructions:

¥Assembly requires two people.

¥Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.

¥Assembly requires the included air pump.

¥Read each assembly step before you begin.

¥During assembly, make sure that all parts are ori- ented as shown in the drawings.

1.Before beginning assembly, be sure that you have read and understand the information in the box above and on the previous page.

Unfold the Inflatable Spa Liner (9). Attach the nozzle on the air pump to the valve on the side of the Inflatable Spa Liner. Use the foot pedal on the air pump to fill the sides of the Inflatable Spa Liner with air.

Attach the nozzle on the air pump to the valve on the floor of the Inflatable Spa Liner (9). Use the air pump to fill the bottom of the Inflatable Spa Liner with air.

Attach the nozzle on the air pump to the valve on the top of the Inflatable Spa Liner (9). Use the air pump to fill the cushion on the top of the Inflatable Spa Liner with air.

2.Unfold the Fabric Spa Surround (8). Be sure that the indicated flap is on the outside of the Fabric Spa Surround. Insert the Inflatable Spa Liner (9) into the Fabric Spa Surround. Align the valve in the Inflatable Spa Liner with the hole in the Fabric Spa Surround.

Flip the flap on the Fabric Spa Surround (8) over the low section of the Inflatable Spa Liner (9).

Be sure that all six cover buckles are fully inserted through the loops in the Fabric Spa Surround (8).

3.Remove the power cord from the Spa Jet Unit (13).

With the help of a second person, place the Spa Jet Unit (13) over the Fabric Spa Surround (8) and the section of the Inflatable Spa Liner (9) which does not have the cushion. Be extremely careful not to tear the Inflatable Spa Liner (9) as you slide the Spa Jet Unit into place.

1

2

3

Inflate here

second

9

Inflate here third

Inflate here first

9

Flap

8

Valve must be visible in this hole

13

Power

Cord

9

8

8

Page 8
Image 8
ProForm PFHS60070 user manual Assembly