5.With the help of a second person, carefully tip the treadmill onto its right side. Have a second person hold the treadmill to prevent it from tipping. Do not pivot the Frame (45).
Attach a Wheel (66) to the Base (62) with a 3/8" x 1 1/2" Bolt (4) and a 3/8" Jam Nut (8) from the direction shown. Do not overtighten the Jam
Nut; the Wheel must turn freely.
6.Set the Left Upright Spacer (65) on the Base (62). Orient the Left Upright (64) so that the bracket is in the position shown.
Hold a Bolt Spacer (71) inside the lower end of the Left Upright (64). Insert a 3/8" x 4" Bolt (1) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (71), 3/8" x 4" Bolt (1), and 3/8" Star Washer (9).
Hold the Left Upright (64) against the Left Upright Spacer (65). Partially tighten a 3/8" Jam Nut (8) with a 3/8" Star Washer (9) onto each 3/8" x 4" Bolt (1); do not fully tighten the Jam
Nuts yet.
With the help of a second person, tip the treadmill so that the Base (62) is flat on the floor.
5 | 66 | 8 |
|
|
| 62 | 45 |
| 4 |
| |
|
|
|
6 |
| 64 | |
1 | 65 | ||
Bracket | |||
9 | |||
| |||
71 | 62 |
| |
9 |
| ||
8 |
|
9
