![](/images/new-backgrounds/1293019/29301927x1.webp)
19.Attach the Rear Feet (57) to the Frame (56) as shown with four #8 x 3/4" Screws (2).
See step 16. Discard the piece of cardboard. Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 29).
20.Press the Grommet (77) into the square hole in the Base (94).
19 |
| |
57 | 57 | |
2 | ||
2 | ||
| ||
| 56 | |
20 |
| |
| 94 | |
| 77 |
21.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 31 and 32).
14