![](/images/new-backgrounds/1179771/17977183x1.webp)
Ethernet
Ethernet cable
AC power cord
Surge protector
Power supply
DC power cord
Receive cable (Satellite In)
Transmit cable
(Satellite Out)
Figure 24: DW6000 power and cable connections
Check the Power LED Check the Power LED. If it is lit, proceed to the next troubleshooting step. If it is not lit, perform the following steps.
1.Power cycle the DW6000 by unplugging the power cord from the power strip or surge protector, waiting 10 seconds, and plugging it back in.
2.If the Power LED is still not lit, check that the AC cord is securely attached to both the power adapter and the DW6000.
3.If the Power LED is still not lit, plug a small appliance, such as a radio, into both the power strip or surge protector and the wall outlet or other power source. If it works, the power sources are functional. Call customer support for assistance.
Check the LAN LED Check the LAN LED. If it is lit, proceed to the next troubleshooting step. If it is not lit, perform the following steps.
1.Check that the Ethernet cable is connected to the DW6000 LAN port and to the computer’s Ethernet port.
2.If the LAN LED is still not lit, power cycle the DW6000 by unplugging the power cord from the power strip or surge protector, waiting 10 seconds, and plugging it back in.
3.If the LAN LED is still not lit, check the Windows Device Manager to see if
your computer's NIC is installed correctly.