![](/images/new-backgrounds/1179771/17977119x1.webp)
DW6000 components
Relocating the DW6000 Your DIRECWAY System was completely assembled by the professional installer. Should you need to move the DW6000 to another location, you would not have to disassemble it. You would simply disconnect the receive, transmit, and Ethernet cables and unplug it from the power strip or surge protector. Then move it to the new location and reconnect all the cables as shown in Figure 1.
Be aware that if you move the DW6000 you may have to reroute, or add to, the coaxial cable that runs from the ground block near the satellite antenna to where the DW6000 is installed. Check the cable requirements in the satellite antenna installation manual for your satellite antenna before you do this.
You may not service the coaxial cable that runs from the ground block to the satellite antenna, or the satellite antenna itself. Only certified professional installers are allowed to do that.
Ethern
Ethernet cable
AC power cord
Surge protector
Power supply
DC power cord
Receive cable (Satellite In)
Transmit cable
(Satellite Out)
Figure 1: DW6000
Preventative maintenance
Keep the convection cooling vents free from blockage. Dust the unit as often as needed with a soft, damp cloth. Do not use solvent or abrasive powder when cleaning.
No internal cleaning or service is required. The DW6000 does not contain user serviceable parts. Opening or tampering with the unit will void its warranty.
2 DW6000 installation and components