Hughes DW6000 manual Professional installation or service requirement, Grounding requirement

Models: DW6000

1 78
Download 78 pages 42.12 Kb
Page 12
Image 12

Professional installation or service requirement

Professional installation and service of the two-way antenna assembly is required by the Federal Communications Commission because the antenna transmits radio frequency (RF) energy.

The two-way antenna assembly must be installed in a location or manner not readily accessible to children.

The two-way antenna assembly must be installed at least 5 feet (1.5 meters) above ground level or any nearby surface on which a person could sit or stand.

CAUTION

The two-way antenna assembly emits radio frequency energy when in the transmit mode.

Unplug indoor power connection before performing maintenance or adding upgrades to any antenna components.

To avoid risk of injury, do not place head or other body parts between feed horn and reflector when system is operational.

Prohibited area (when operational)

Grounding requirement

WARNING

The RG6 coaxial cable must be connected to a ground block. The ground block should be located at the point the coaxial cable enters the building. The ground wire must be connected to the ground block and routed to the earth ground.

4 DW6000 installation and components

Page 12
Image 12
Hughes DW6000 manual Professional installation or service requirement, Grounding requirement