7.Attach the Left Handrail (88) to the Left Upright (89) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4).
Do not tighten the Screws and Bolt yet.
Attach the Right Handrail (87) in the same way.
8.Set the console assembly face down on a soft surface to avoid scratching the console assembly.
Remove all the Screws (A) attaching the Crossbar (93). Next, lift off the Crossbar. Discard the Screws.
9.IMPORTANT: To avoid damaging the Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (112).
Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (112), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten them.
7 |
| 4 11 |
|
|
| 87 | |
11 | 5 | 5 |
|
|
| ||
4 |
| 88 |
|
|
|
| |
89 |
|
|
|
8 |
| Console | |
|
| ||
|
| Assembly | |
| A |
| |
| 93 |
| |
9 | 9 | 112 | |
| |||
| 93 | 35 | |
| 87 | ||
9 | 112 | ||
| |||
35 |
|
| |
| 88 |
|
10
