ProForm PFTL311340 user manual Side View

Models: PFTL311340

1 22
Download 22 pages 44.09 Kb
Page 7
Image 7

2.Identify the Right Upright (62) and the Left Upright (9) by observing the large round hole near the lower end of the Right Upright. Make sure that there are two U-Nuts (124) in the lower end of each Upright. See inset drawing 2a.

Straighten the Wire Harness (21), and feed it into the lower end of the Right Upright (62) and out of the upper end. Next, slide the slot in the Right Upright onto the in- dicated Upright Lock Bracket (125) (see drawing 2b). Slide the Right Upright down until it reaches the Base (11).

Make sure that the Wire Harness is not pinched. Loosley attach the Right Upright to the Base with two 5/16” x 3” Bolts (123) and two 5/16” Star Washers (122).

With the help of a second person, tip the treadmill onto its other side. Attach the Left Upright (9) as described above. (Note: There is not a wire harness on the left side.) Attach the other Wheel (not shown) to the Base

(11)as described in step 1.

3.With the help of a second person, raise the Right Upright

(62)and the Left Upright (not shown) to the vertical posi- tion. Open part bag B. Identify the Right Handrail (47), which has a large hole in the left side. Remove any plas- tic ties from the rectangular bracket on the Right Handrail. Feed the Wire Harness (21) up into the bracket and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the large hole.) Press a Handrail Cap (41) onto the lower end of the Right Handrail as shown.

Insert the bracket on the Right Handrail (47) into the top of the Right Upright (62) so the Handrail Cap (41) is rest- ing against the Right Upright. Attach the Right Handrail and the Handrail Cap with three 1” Bolts (8), three 1/4” Washers (39), and two 1/4” Star Washers (111) as shown. Do not tighten the Bolts yet.

Attach the Left Handrail (not shown) as described above. Note: There is not a wire harness on the left side.

4.Set the Crossbar (34) on the brackets on the Handrails (1, 47). Attach the Crossbar with two Crossbar Screws (53). Do not tighten the Crossbar Screws yet.

Open part bag C. Attach the end of the ground wire to the small hole in the side of the Right Handrail (47) with a Silver Ground Screw (104).

7

2

 

 

 

 

 

62

 

 

 

 

 

Slot

 

 

 

9

21

Hole

 

125

 

 

 

 

11

 

 

 

 

 

122

123

2a

9, 62

2b

 

125

 

 

Side

 

 

 

View

 

 

124

 

11

 

3

 

 

 

 

 

 

21

 

Large

Hole

Bracket

8

39

 

47

111

 

8

111

 

39

62

 

 

41

39

 

8

 

4

 

1

Ground

 

53

Wire

 

104

34

 

53

 

47

 

Page 7
Image 7
ProForm PFTL311340 user manual Side View