10.Insert the wires into the Console Base (26) as you set the Console Base on the Handrails (18). Be careful not to pinch the wires. Next, thread two 1/4" x 1/2" Bolts (22) with 1/4" Star Washers (21) into the Handrails and the Console Base; do not tighten the Bolts yet.
Attach the Console Base (26) to the Handrails (18) with four #8 x 3/4" Screws (2). Then, tighten the two 1/4" x 1/2" Bolts (22). Remove the plastic tie from the right Handrail (18).
11.Lower the Uprights (31, 36) as shown.
See the inset drawing. Position the Uprights (31, 36) so that the treadmill Frame (74) is cen- tered between the Uprights.
Firmly tighten the 3/8" x 2 1/2" Bolts (32) and then the 3/8" x 2 1/4" Bolts (5) on each side of the treadmill. Do not overtighten the 3/8" x 2 1/2" Bolts.
10 | 26 | Front View |
|
18 |
|
|
| 18 |
2 | 21 |
| 2 | 21 |
22 |
| |||
|
|
|
| 22 |
11 |
| Side View | 32 | |
|
|
|
| 5 |
|
| 74 | 31, 36 |
|
|
|
|
| |
| 31 | View from Above | 36 | |
|
| 74 | ||
10
