ProForm PFTL42105.0 user manual Assembly, Make sure that the power cord is unplugged

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver	,
rubber mallet	, adjustable wrench	, and wire cutters	.

For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first

check to see if it has been pre-assembled.

Console

Bolt (22)–2 3/4” Screw (2)–6 Silver Ground

Screw (27)–2

Frame Washer

(33)–2

Handrail Bolt (20)–4

Wheel Spacer	1/4” Star Washer
(44)–4	(21)–2

Upright/Wheel Bolt (40)–6

Upright Star

Washer (39)–4

Frame Bolt (32)–2

	Handrail Star
Nut (47)–4
	Washer (19)–4

1.Make sure that the power cord is unplugged.

Have a second person hold the Upright Base (48) in the position shown, with the wheel holes at the top. Identify the Left Upright (31), which has two latch holes in one side. Orient the Left Upright as shown, and attach it to the Upright Base with two Upright Bolts (40) and two Upright Star Washers (39). Do not tighten the Upright Bolts yet. Note: There may be left and right stickers on the Uprights and on the Upright Base.

1	Wheel Holes
	Latch
	Holes
	48
	31
	39
	40

6