4.SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. Use only a
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclock- wise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. The center of the walking belt should just touch the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
b | |
| |
Rear Roller Adjustment Bolts | |
c. If the walking belt still slows when walked on, please call our Customer Service Department,
5. SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS
a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using a
the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power
cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. 
b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4
of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run | ||
the treadmill for a few minutes. Repeat until the walking belt is | b | |
centered. | ||
| ||
c. If the walking belt slips when walked on, first remove the key |
| |
and UNPLUG THE POWER CORD. Using the allen wrench, |
| |
turn both rear roller adjustment bolts clockwise, 1/4 of a turn. |
| |
When the walking belt is correctly tightened, you should be able |
| |
to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt | ||||
centered. Plug in the power cord, insert the key and run the |
|
|
|
|
|
|
|
| |
| a |
|
| |
treadmill for a few minutes. Repeat until the walking belt is prop- |
|
|
| |
|
|
|
| |
erly tightened. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
