![](/images/new-backgrounds/1145988/14598823x1.webp)
11. With the help of a second person, carefully lower |
the Uprights (54, not shown) to the floor. |
Attach the ground wire on the Wire Harness (39) |
to the indicated hole in the Base (52) with an M4 |
x 10mm Ground Screw (84). |
11
52 | 54 |
Hole |
Ground Wire
84
12. See the lower drawing. Position the Uprights |
(53, 54) so that the Frame (51) is centered be- |
tween them. |
Firmly tighten the two M10 x 60mm Patch Bolts |
(1) and the four M10 x 75mm Bolts (2) (only one |
side is shown). Be careful not to overtighten |
the M10 x 60mm Patch Bolts. Raise the |
Uprights (53, 54). |
| 39 |
|
12 | 53, 54 | 1 |
|
| 2 |
| Top View |
|
54 | 51 | 53 |
12