1. Make sure that the power cord is unplugged. | 1 |
|
|
|
|
|
|
| |
With the help of a second person, carefully tip |
|
|
| B |
|
|
| A | |
the treadmill onto its left side. Partially fold the |
|
|
|
|
Frame (56) so that the treadmill is more stable; |
|
|
| Hole |
do not fully fold the Frame yet. |
|
|
| |
|
| 38 | 83 | |
|
| Tie | ||
Remove and discard the two indicated bolts (A) |
|
|
| |
|
|
| 81 | |
and the shipping bracket (B). |
|
|
| |
|
|
|
| |
Cut the tie securing the Upright Wire (38) to the |
|
|
| 2 |
Base (83). Use the indicated tie to pull the |
|
|
| |
Upright Wire out of the indicated hole. |
|
|
|
|
Attach a Base Pad (81) to the Base (83) in the |
|
|
|
|
location shown with a Base Pad Spacer (13) and |
| 13 |
|
|
a #8 x 1" Tek Screw (2). Then, attach another | 56 | 81 |
| |
|
| |||
Base Pad (81) with only a #8 x 1" Tek Screw (2). |
|
| ||
|
| 2 |
| |
2. Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4), | 2 |
|
|
|
and the shipping bracket (C) from the Base (83). |
|
|
| |
|
|
|
| |
Attach a Wheel (84) with the Bolt and the Nut |
|
|
|
|
that you just removed. Do not overtighten the |
|
|
|
|
Nut; the Wheel must turn freely. Discard the |
|
|
|
|
shipping bracket. |
| 83 |
| |
|
| 4 |
|
|
|
|
| 84 |
|
|
| C |
|
|
|
| 8 |
|
|
3. Identify the Right Upright (78) and the Right | 3 |
|
|
|
Upright Spacer (79), which are marked with |
|
|
| |
|
|
|
| |
stickers. Insert the Upright Wire (38) through the |
|
|
| 78 |
Right Upright Spacer as shown. |
|
|
| |
38 |
|
|
| |
|
|
|
| |
See the inset drawing. Tie the long tie in the |
|
|
| 38 |
Right Upright (78) securely around the end of |
|
|
| |
Long |
|
| 79 | |
the Upright Wire (38). With the help of a second |
|
| ||
Tie |
|
| 83 | |
person, hold the Right Upright near the Base |
|
| ||
|
|
| ||
(83). Then, pull the other end of the long tie until |
|
|
|
|
the Upright Wire is routed completely through |
|
|
|
|
the Right Upright. |
|
|
|
|
|
| 78 |
|
|
| 38 | Long |
|
|
|
| Tie |
|
|
| 7 |
|
|
|
