5.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet.
Attach a Base Pad (81) to the Base (83) in the location shown with a 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a 1" Tek Screw (2).
Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Do not overtighten the Nut; the
Wheel must turn freely.
6.With the help of a second person, hold a Bolt Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (32) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4" Bolt (6), and 3/8" Star Washer (32).
Orient the Left Upright (74) and the Left Upright Spacer (76) as shown. Hold the Left Upright Spacer and the Left Upright against the Base (83). Finger tighten the two 3/8" x 4" Bolts (6); do not fully tighten the Bolts yet.
Press a Base Endcap (77) into the Base (83).
With the help of a second person, tip the tread- mill so that the Base (83) is flat on the floor.
5 |
|
|
|
| 83 |
| |
81 |
|
| 56 |
2 |
|
| 4 |
|
|
| |
| 13 |
|
|
|
|
| 84 |
| 2 | 81 | 8 |
|
|
| |
6 |
|
|
|
| 6 |
| 74 |
|
|
| |
| 32 |
|
|
80 | 76 |
|
|
|
|
| |
77 | 80 |
|
|
|
|
| |
| 83 |
|
|
8
