14
Settings
1.Use the Modeling Light Control [7] to select MAX PROP,MAX,PROP or ½ PROP.Press the
Modeling Light switch [9] to turn on the modeling light.
2.Use Flash Light Energy Control A [8] and B [19] to set the energy levels.
3.Use the Ready Control [16] to select
4.Use the Speed Control [18] to select MAX, 75%, 50% or 25%.
Sync via cable
1.Connect a sync cord from the camera to one of the Sync Connectors [2] on the generator.
1.Connect a sync cord from the camera to one of the Sync Connectors [2] on the generator.
2.Connect another sync cable from the flash meter to the free Sync Connector [2].
Sync via Photocell /
1.Connect an IR transmitter to the camera.
2.Turn the Sync Control [5] to SLAVE.
Sync via radio (Profoto Air)
1.Connect an Air Remote or Air Sync unit to the camera.
2.Turn the Sync Control [5] to RADIO.
3.
Wireless remote control
For Air Remote control, both radio channel and group have to be set.The group can be set individually for each lamp head. For wireless use with Profoto Studio 2 and AIR USB, only radio channel has to be set.
Changing radio channel and group settings:
1.Turn the Sync Control [5] to SET.
2.The radio channel and group setting for the individual lamp head is shown separately in Flash Light Energy Display A [8] or B [19] as a radio channel number
3.Turn Flash Light Energy ControlA [8] or B [19]
4.Push and turn Flash Light Energy ControlA [8]
5.Push and turn Flash Light Energy Control B [19]
6.Turn the Sync Control [5] to RADIO.
Turn off generator
1.The modeling light, energy level, radio channel and group settings are automatically saved as soon as they are changed and will be available at start up.
2.Press the On switch [13] to turn off the power.
3.The Power Supply Indicator [12] will be red, indicating that the generator is receiving power but is in standby mode.
4.Remove the power cable.
15
www.profoto.com | www.profoto.com |
