Safety Precautions
1.Before using the flash, make sure that your lighting equipment is plugged into a 110 volt AC power source. Do not use any power supply other than the AC specification indicated on your equipment.
2.Do not expose the equipment to sunlight, moisture, dust, dirt, rain or water.
3.Any exposure to chemical solutions, gasoline, grease, oil, paint, or detergents can result in permanent damage to your equipment.
4.Do not insert any metal objects into your lighting equipment.
5.Do not touch or handle equipment with wet hands or allow your equipment to be in contact with water.
6.Do not keep the power on when the light is not in use.
7.Do not attempt to repair your lighting equipment yourself. If a problem arises, contact the store from which you purchased the light.
8.If the audible flash ready signal buzzes for a long period of time or there is no response from your flash, please disconnect your flash from the power supply and reconnect.
Specifications:
Power Supply: | AC100 130volt 50/60Hz |
Strobe output: | 300WS |
Guide No. (ISO100): | 54m |
Cooling Fan: | |
Power Setting: | 1/32 to 1/1 continuously |
Recycle Time: | |
Flash Duration: | |
Recycle Indication: | Ready Light & Audio Signal & |
| Modeling Lamp |
Flash Beam Width: | Over 55 Degree |
Slave Sensitivity: | Over 33ft. Radius,360 Degree |
Modeling Lamp: | Diffused Halogen Quartz 150W/E27 |
Color Temperature: | 5600K |
Synch Cord Voltage: | 6VDC |
Triggering: | Synch Cord, Test Button & Slave Sensor |
Fuse: | 10A |
Housing Size: | 136mm127mm320mm |
Body Weight: | 2.2kg |
