When to change the battery
The indicator light above the off and on switch will flash when the microphone is turned on if
the battery is good. When the battery level reaches approximately one hour of remaining use,
the indicator light will glow and the battery should be replaced. A CR2 battery will normally last
for up to 800 hours depending on the fre quency and pattern of use.
Caution
1. Use only a primary (non recharge able) CR2 lithium battery. The battery supplie d cannot
be recharged.
2. If you will not be using the microphone for an extended period of time, remove the battery
before storage.
3. If the battery leaks, be sure to thoroughly clean the battery compartment before installing
a new battery.
Connection
Slide the foot of the microphone into to the accessory shoe of your camcorder or DSLR (see
Figure 1). T urn the lo cking whe el to fix the microphone in place. Be sure that your ca mcorder
or DSLR is POWERED OFF. Insert the mini stereo plug of the microphone into the external
microphone input of your camcorder or DLSR. (Se e Figure 2)