ProMaster 8026 instruction manual Important Notes, Package includes

Vectra MIC-1 Electret Condenser Microphone

The Vectra MIC-1 stereo microphone fits most digital video and DSLR cameras. This microphone offers more natural improved sound over what you will normally get with the mic built in to your camera or camcorder. Its high sensitivity and strong directional capability gives you superb clarity for subjects that are further away. The Vectra MIC-1 offers a selectable pick- up pattern to get the best sound depending on the scene you are recording.

Important Notes:

The microphone is a sensitive precision instrument. DO NOT subject it to impact or excessive vibration. Keep it away from high temperatures and humidity.

If the microphone is operated near an amplifier you will experience feedback. If this happens, move the microphone away from the amplifier or turn down the volume of the amplifier.

Changing the mode switch while recording will cause the switch noise to be recorded.

If the windscreen gets wet from rain or other sources, it should be dried in a cool, dry place. Avoid drying in direct sunlight to prevent deterioration of the foam.

Package includes:

MIC-1 Electret Condenser Microphone

Wind Screen

CR2 battery

Storage bag

Instruction Manual

Installing or changing the battery

The battery must be installed in order for the microphone to operate.

1.Push the battery cover backward and lift off.

2.Push the battery towards the front of the microphone to remove.

3.Put the new battery into the battery compartment. Be sure to observe the correct polarity.

4.Replace the battery cover and slide into place.