![](/images/new-backgrounds/1147440/14744075x1.webp)
FastTrak SX4300, SX8300 User Manual
2.Insert the Promise FastTrak Driver diskette in the A: drive.
3.Under Install Hardware Device Drivers, select Search for a suitable driver...
and click Next.
4.Under Locate Driver Files, uncheck Floppy disk drives and
5.Under Insert the manufacturer’s installation disk, type A:\win2000 and click OK.
6.Under Driver Files search Results, when a:\Win2000 \ft8300.inf should appears, click Next.
7.If a Digital Signature Notice appears, click Yes.
8.Under Completing the New Hardware Wizard, click Finish.
9.Click Yes to restart your PC.
10.Remove the Promise FastTrak Driver diskette.
Note: Check the readme file, included with the downloaded driver files, for instructions on installing the RAID Console.
Confirm Installation
1.From the Windows Desktop, open the Control Panel from My Computer.
2.Click on the System icon.
3.Choose the Hardware tab, and then click the Device Manager button.
4.Click the + in front of SCSI controllers. Win2000 Promise FastTrak SX4300/ 8300 (tm) Controller should appear.
Red Hat Linux 8.0, 9.0, EL 3.0, EL 4.0
Install Driver During New OS Installation
1.Start the RedHat Linux Installation by booting with the installation diskette or bootable CD ROM.
2.At the Welcome to Red Hat Linux ... installation screen, a prompt labeled boot: will appear at the bottom of the screen. Type linux dd and press Enter.
3.When the Installer asks, Do you have a driver disk? click Yes.
4.At the Insert your driver disk and press OK to continue, insert the driver diskette into the floppy drive and click OK.At the Devices dialog box, insert the FastTrak driver diskette in the floppy drive and click OK.
5.When the Devices dialog box appears, select Add Device.
6.When the Installer asks, What kind of device would you like to add?, select SCSI.
32