Manuals / Brands / Computer Equipment / Network Hardware / Promise Technology / Computer Equipment / Network Hardware

Promise Technology E310f, E310s, VTrack Viewing IP address and settings, Exiting the CLU

1 38

Download 38 pages, 1.5 Mb

VTrak E-Class Quick Start Guide

28

3. Type the new IP Address.

4. Follow the same procedure to specify the Subnet Mask, Gateway IP

Address and DNS Server IP Address.

If you do not have a DNS server, skip the DNS Server IP address.

5. Press Ctrl-A to save your settings.

Automatic IP settings

To make Management Port settings automatically:

1. Press the arrow keys to highlight DHCP.

2. Press the spacebar to toggle to Enable.

3. Press Ctrl-A to save these settings.

Viewing IP address and settings

To view the current IP address and network settings when using DHCP:

1. Press the arrow keys to highlight DHCP.

2. Press the spacebar to toggle to Disable.

The current Management Port settings are displayed.

3. Press the spacebar to toggle DHCP back to Enable.

4. Press Ctrl-A to save these settings and move to the RAID configuration

screen.

Exiting the CLU

1. Highlight Skip the Step and Finish and press Enter.

2. Highlight Return to CLI and press Enter.

This completes the Management Port setup. Go to “Step 8: Creating Disk Arrays

with WebPAM PROe” on page29.

Contents

Main VTRAK VTrak E-Class Task List Step 1: Unpacking the VTrak Page Page Step 2: Mounting VTrak in a Rack Page Step 3: Installing Disk Drives Drive Slot Numbering AAMUX Adapter Installing Disk Drives Page Page Step 4: Making Management and Data Connections Fibre Channel Configuring a Storage Area Network Configuring Direct Attached Storage Step 4: Making Management and Data Connections 13 Figure 12. VTrak E310f DAS data and management connections Network Switch O VTrak Mgmt UPS Configuring JBOD Expansion Step 4: Making Management and Data Connections 15 Figure 14.JBOD expansion with no single point of failure E310f Mgmt UPS FC 1 FC 2 Mgmt UPS Serial Attached SCSI Configuring Direct Attached Storage Configuring Cascaded Storage Page Configuring JBOD Expansion Page Step 5: Making Serial Cable Connections Step 6: Connecting the Power Page Step 7: Setting the IP Address Setting up with the CLI Setting up with the CLU Setting system date and time Making Management Port settings Viewing IP address and settings Exiting the CLU Step 8: Creating Disk Arrays with WebPAM PROe Logging into WebPAM PROe Regular Connection Secure Connection Page Selecting a Language Creating a Disk Array Automatic Express Advanced Logging out of WebPAM PROe Contacting Technical Support Technical Support Services United States The Netherlands Germany Italy Taiw an China