ITEM
Program Menu.
﹟Test Meter ﹡Test Point ﹫Pattern
Operation
Adjusting
Value
| Preset |
| Four key model : |
| Other adj. : |
| Adjust |
| Step 1 : Press and relese the OSD control knob to | Best Point | |
|
|
| activate the OSD menu. |
|
|
|
|
| Step 2 : Press +/▲or |
| |
C |
|
| option of OSD icon. |
|
|
|
| Step 3 : Press and release MENU key to acress the |
| ||
|
|
| option.The color of the inner area of the |
| |
|
|
| OSD will changed from blue to green. |
| |
|
|
| Step 4 : To make your adjustment,press +/▲or |
| |
|
|
|
| ||
|
|
| Step 5 : Press and release MENU key to store |
| |
|
|
| the change.the color of the inner area will |
| |
|
|
| go back to blue.You can select select other |
| |
|
|
| function to make adjustment by +/▲or |
| |
|
|
| .Also you can select exit icon or press Exit |
| |
|
|
| key to exit the OSD menu. |
| |
|
|
|
|
| |
| Background | ﹟Color Analyzer | 1. Set the contrast to MAX.,Brightness to Y=0.7 | Y = 0.7 | |
| White | ﹫R.G.B off | set color is 9300°K using the OSD. | ±0.1FL | |
D | Balance | (68KHz,1024x768) | 2. Set the OSD to COLOR of sub menu and press | x = 0.283 | |
Adjust |
| knob. |
| ±0.01 | |
|
|
| 3. Make the adjustment R.G.B BIAS low light to | y = 0.297 | |
|
|
| the value shown at right by using encorder. | ±0.01 | |
|
|
|
|
| |
| White | ﹟Color Analyzer | 1. Move the OSD to the R.G.B. DRIVE. | ||
| Balance | ﹟Oscilloscope | 2. Move the OSD to the G DRIVE and make the | ||
E | Adjust | ﹡Cathode G | adjustment to the value shown at right by using |
| |
| ﹫3” block | encorder. |
| x = 0.283 | |
|
| 3. Move the OSD to the | |||
|
| (68KHz,1024x768) | |||
|
| Adjustment to the value shown at right by using | ±0.01 | ||
|
|
| |||
|
|
| Encorder. |
| y = 0.297 |
|
|
|
|
| ±0.01 |
|
|
|
|
| |
F | ABL | ﹟Color Analyzer | 1. Set the contrast to MAX.,Brightness to MAX. | Y = 33FL | |
Adjust | ﹫Full White | 2. Make the adjustment to the value shown at right |
| ||
|
| (64KHz,1280x1024) | by adjustment ABL on the OSD menu. |
| |
|
|
|
|
|
|
| Other | ﹫Full White | 1. Set the FREQ. to 55 (562NS) |
|
|
| Function | (64KHz,1280x1024) | 72 (777NS,772NS,572NS) |
| |
| Seting |
| 87 (786NS,787NS,986NS) |
| |
G |
|
| 2. Set the OSD to PROVIEW |
|
|
|
|
| 3. Set the BURN to Disable |
|
|
|
|
| 4. Set the TIME to 15 |
|
|
|
|
| 5. Set the DEFO to TDA9113/9112 (786NS,787NS,986NS) |
| |
|
|
| TDA9115 | (772NS,572NS,562NS) |
|
|
|
|
|
|
|
12
