TECHNICAL (continued)

Requesting projector status (Get command)

(1)Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) from the computer to the projector.

(2)The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1)Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.

(2)The projector changes the setting based on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1)The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector changes the specified setting to the default value.

(3)The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1)The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2)The projector in creases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1)The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2)The projector decreases the setting value on the above setting code.

(3)The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned.

When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.

Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.

•Provide an interval of at least 40ms between the response code and any other code.

•The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

•Commands are not accepted during warm-up.

TECHNICAL

TECHNICAL - 7

Page 32 Page 34
Page 33
Image 33
Proxima ASA DP6870 manual Requesting projector status Get command, Changing the projector settings Set command
Page 32 Page 34

DP6870 specifications

Proxima ASA DP6870 is an innovative digital projector designed to deliver an exceptional visual experience in various environments, including corporate settings, educational institutions, and home theaters. This model stands out due to its impressive combination of features, cutting-edge technologies, and robust characteristics.

One of the main features of the Proxima ASA DP6870 is its advanced image projection capabilities. The projector boasts a native resolution of 1920x1080 pixels, ensuring sharp, clear images that maintain high levels of detail. With a brightness level of 4500 ANSI lumens, the DP6870 can perform effectively in both dimly lit rooms and well-lit spaces, making it a versatile choice for different lighting conditions.

The DP6870 also employs state-of-the-art DLP (Digital Light Processing) technology, which enhances color accuracy and provides a smooth viewing experience free from motion blur. This technology is particularly advantageous for presentations that incorporate dynamic content such as videos and animations. The projector’s impressive contrast ratio of 3000:1 further enhances image quality, ensuring deeper blacks and vibrant colors.

Connectivity is another strong point of the Proxima ASA DP6870. The projector features multiple input options including HDMI, VGA, and USB ports, allowing for easy connection to a variety of devices such as laptops, Blu-ray players, and gaming consoles. This flexibility ensures that users can seamlessly integrate the projector into their existing technology setups.

Durability and ease of use are also key characteristics of the DP6870. The projector is built with reliability in mind, featuring a long-lasting lamp life of up to 5000 hours. This longevity reduces the need for frequent replacements, making it a cost-effective choice for long-term use. Additionally, the user-friendly interface and remote control functionality simplify operation, allowing users to focus on their presentations rather than technical details.

In summary, the Proxima ASA DP6870 is a high-performance digital projector that combines advanced image projection capabilities, robust connectivity options, and long-lasting durability. Its blend of DLP technology, impressive brightness, and easy usability makes it an excellent choice for anyone seeking a reliable and powerful projector for various applications.
Top Page Image Contents