CW600E - Enclosed In-Wall System
•
•Five Driver,
•Fully enclosed, highly braced wooden enclosure fits within standard, 16” studded wall
•
Frequency Range | |
Recommended Power: | |
Impedance: | 6 Ohms |
Sensitivity (1W (2.83V) @1m) |
|
Anechoic Chamber: | 86dB SPL |
Typical Listening Room: | 88dB SPL |
Drivers: | 2 x 6 1/2” Woofers, |
| 2 x 3 1/2” Midranges, |
| 1” Dome Tweeter |
Overall Dimensions (W x H x D): | 14 x 31 3/4 x 3 3/4” |
12 7/8 x 30 13/16” | |
Weight: | 31 lbs |
14"
356 mm
31 3/4" 807mm
12.875"
327mm
30 13/16"
782mm
3 3/4" 86mm
Installation Notes
•The CW600E requires a full width stud bay clear of any obstructions, pipes, wires, etc.
•Optimum mounting should place the tweeter as close to ear level as possible.
•System should be vertical as shown.
•Wire connections are on bottom of system. The system may be inverted if needed.
•Lift into aperture gently with two people if possible. (System is heavy!)
•Tighten 12 “dog leg” screws with a firm torque setting. Do not over tighten!
•Midrange and treble switches can be adjusted to suit room acoustics and personal taste.
•Due to the CW600E system being fully enclosed no
•System may be painted. Scuffing and priming recommended.
•See manual for more installation hints.
To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342
PSB Speakers reserves the right to change specifications or features without notice. © 2005 PSB Speakers, a division of Lenbrook Industries Limited.
PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 08/05. All rights reserved.
No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers. 869 CW600E Data
w w w. p s b s p e a k e r s . c o m
1 8 8 8 7 7 2 0 0 0 0
