3.1BUZZER
The TempTrac buzzer is activated each time connected alarm condition happens. The following are representative alarm conditions that may be connected to and activate the TempTrac buzzer (some alarms may be connected to and operate separately from the TempTrac on some products).
∙High/low water temperature alarm
∙Probe failures
∙High and low gas pressure
∙Low water
The buzzer is silenced by pressing any button (alarm condition still present)
3.2ALARM RECOVERY
1.Probe failure alarm automatically ends after normal operation is
2.Temperature alarms “HA” and “LA” automatically stop as soon as probe 1 senses temperatures within normal operating parameters.
3.High and low gas pressure alarms recover when pressure is normalized and any button is pressed. (if used)
4.Low water alarm recovers when water level normalizes and any button is pressed. (if used)
5.RTC alarm stops after programming the real time clock.
6.RTF alarm requires the replacement of the real time clock.
For additional information, contact the PVI Industries Customer Service Dept at
Page 6 / 6 |
