![](/images/new-backgrounds/1198049/1980499x1.webp)
1.UNIT 1-CONTROL OPERATION PANEL
This operation panel remotely controls the main unit 1.
2.UNIT 2- CONTROL OPERATION PANEL
This operation panel remotely controls the main unit 2.
3.EJECT BUTTON
Press to eject the disc.
Note: Disc can’t be ejected unless the stop or pause button has been pushed first.
4.MAT RIX L.C.D
Display the details of music data, please refer to the LCD instruction (page 6)
5.CONT./SINGLE BUTTON ( OUTRO)
To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display.
*AUTO CUE SINGLE - After each track, the unit pauses at the beginning of next track. The playback starts from audible point.
*CONTINUE
*OUTRO - The unit will play the last 30 seconds of each track. Press the button for 3 seconds to switch OUTRO
function.
Note: OUTRO is not available for MP3 music.
6.T IME / ST OP BUTTON
This button switches the time display between total remaining time, each remaining time and elapsed playing time . The unit will be in the “stop ” mode if you continue pressing the button for 3 seconds.
7.SEARCH BUTTON
Pressed the button to switch the function of Jog Dial between SE ARCH and P ITCH BEND.
When the indicator LE D is light, dial the jog for quick search forward and backward.
When the indicator LED is off, dial the jog for pitch bend function.
If the jog is unmoved for 8 seconds, the indicator is off, and the jog is for pitch bend function.
8. TRACK BUTTON
These buttons select the track to be played.
9.+10 BUTT ON
Pressed the button to forward 10 tracks. If you forward 10 tracks, and the tracks over total tracks, the unit will jump to track 1 ...
10. PLAY/ PAUSE BUTTON
Each press of this button causes the operation to change between PLA Y and PAUS E modes.
40
11. CUE BUTTON
The cue function allows the CD returning to the memorized point. In PA USE mode, pressing the CUE button to set the cue point, and the CUE button blinks; in PLAY mode, press this button to pause the unit at the memorized point.
12. BOP BUTT ON
The playback will automatically play from the CUE point upon the button is pressed.
13. PITCH BUTTON
Select the pitch change range from ±8%, ±16%, ±32%,
±100% . The playback speed will change when you move the pitch control slider.
14. PITCH CONTROL SLIDER
To match the choices of playback speed (8%, 16%, 32%, 100%), you can choose what range you want between minimum (up side) and maximum (bottom side) by moving the pitch control slider.
15. PITCH BEND + / - BUTTON
When each of the two CD players is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the “ + “button. While pressing the “ – “ button, the pitch will automatically drop to - 16 % from current setting . By the way of changing the pitch the position of the beats can be matched.
- 4 -