PYLE Audio PDLB372 manual Hang the display, Installing the LCD, Plastic Buttom

Step 3 Arm Assemble

Remove the Tube Cover. Push the Plastic Button down and assemble the Arm. Adjust the arm assembly to the desired height then free the Plastic Button. Recover the tube cover.

Step4 Installing the LCD

According LCD hole's size, deep, position to choose bolts. Using chose bolts(A-D) and washers(E) to install the LCD on the panel. As shown in Fig3.

Plastic Buttom

Arm

Carefully: Don't force the bolt to LCD hole, avoiding damage to people and instrument. Don't use electronics drill to fasten screw

Caution : This Product LCD /Plasma

Wall Mount Bracket is intended for use only with the maximum weights indicated .See apparatus instructions .Use with products heavier than the maximum weights indicated instability causing possible injury .

Step5 Hang the display

A-D

E

TV Plate

Fig 3

Firstly lift up the TV plate installed the LCD, making the trough on the arm fit to the trough on it ,according trough to embed the TV plate into the wall plate.

Fig 2

Once the TV is positioned in place,

fasten the Tighten Bolts on Receiving Joint clockwise to secure the display to the Arm Assembly.

Warning: Some TV require two people to lift, as we are not responsible for any personal injur y or product damage due to mishandling.

Tighten bolt

Fig 4

-4- -5-