2. Identify the Right Upright (24) and the Left Upright (99).

2

 

42

 

 

 

 

Straighten the Upright Wire (42), and feed it into the lower

 

 

 

 

 

end of the Right Upright (24) and out of the upper end.

 

 

 

 

 

 

 

Next, hold the Right Upright against the right side of the

 

 

24

 

 

 

 

Base (69); make sure that the Right Upright is turned

 

69

 

 

 

 

so that the upper end is angled in the direction

 

 

 

 

 

 

shown. Hand tighten two 3” Bolts (37) with one Star

 

 

 

 

 

 

 

Washer (63) and two Washers (45) into the Base and the

63

 

 

 

 

 

 

Right Upright; be careful not to damage the Upright

 

 

 

 

 

 

Wire.

37

45

 

Small

 

 

 

With the help of a second person, carefully tip the tread-

 

 

 

 

mill onto its other side. Attach the Left Upright (99) and

 

 

 

Holes

 

 

 

the other Wheel (not shown) as described above and in

 

 

 

 

 

 

 

step 1. Make sure that the two small holes in the Left

 

 

 

 

 

 

 

Upright are positioned as shown. Note: There is not

 

 

 

99

 

 

 

an upright wire on the left side.

 

 

 

 

 

3.

With the help of a second person, carefully tip the tread-

3

 

 

 

 

 

 

mill so that it is flat on the floor, and raise the Uprights

 

35

71

 

 

 

 

(99, 24) to the vertical position as shown.

 

 

 

 

 

Hold the Crossbar (25) between the Left Upright (99) and

 

 

 

 

72

 

the Right Upright (24). Attach the Crossbar with two 3”

37

 

25

Large

 

Bolts (37). Firmly tighten the Bolts.

 

 

 

 

Identify the Right Handrail (72), which has a large round

 

 

42

Hole

 

 

 

hole in the location shown. Route the Upright Wire (42)

 

 

 

 

 

 

 

through the hole in the Right Handrail. Next, hand tighten

 

99

35

 

 

 

 

a 2 1/4” Bolt (35) into the upper end of the Right Handrail

 

 

 

37

 

and the Right Upright (24). Then, hand tighten a Handrail

 

 

 

 

 

 

Bolt (27) with a Washer (45) into the lower end of the

 

 

 

 

 

 

 

Right Handrail and the Right Upright. Be careful not to

 

 

 

 

 

 

 

pinch the Upright Wire. Firmly tighten the Bolts.

 

45

27

 

 

 

 

Attach the Left Handrail (71) in the same way. Note:

 

 

 

24

 

There is not an upright wire on the left side.

 

 

 

 

 

 

 

 

 

 

45

27

7

Page 7
Image 7
PYLE Audio PFTL31404.1 Right Upright be careful not to damage the Upright Wire, Bolts 37. Firmly tighten the Bolts