PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a
b. | If the walking belt is overtightened, treadmill perfor- | b |
|
| mance may decrease and the walking belt may be- | ||
| come damaged. Remove the key and UNPLUG THE |
| |
| POWER CORD. Using the allen wrench, turn both |
|
|
| rear roller adjustment bolts counterclockwise, 1/4 of a |
|
|
| turn. When the walking belt is properly tightened, you |
|
|
| should be able to lift each side of the walking belt 2 to |
|
|
| 3 inches off the walking platform. Be careful to keep |
|
|
| the walking belt centered. Plug in the power cord, in- |
| Rear Roller Adjustment Bolts |
| sert the key, and run the treadmill for a few minutes. |
| |
| Repeat until the walking belt is properly tightened. |
|
|
c.If the walking belt still slows when walked on, see the front cover of this manual.
PROBLEM: The walking belt is
SOLUTION: a. If the walking belt is | a |
and UNPLUG THE POWER CORD. If the walking | |
belt has shifted to the left, use the allen wrench to |
|
turn the left rear roller bolt clockwise 1/2 of a turn; if |
|
the walking belt has shifted to the right, turn the |
|
left bolt counterclockwise 1/2 of a turn. Be careful not |
|
to overtighten the walking belt. Plug in the power |
|
cord, insert the key, and run the treadmill for a few |
|
minutes. Repeat until the walking belt is centered. |
|
b. If the walking belt slips when walked on, first remove | b |
the key and UNPLUG THE POWER CORD. Using | |
the allen wrench, turn both rear roller bolts clockwise, |
|
1/4 of a turn. When the walking belt is correctly tight- |
|
ened, you should be able to lift each side of the walk- |
|
ing belt 2 to 3 inches off the walking platform. Be |
|
careful to keep the walking belt centered. Plug in the |
|
power cord, insert the key, and carefully walk on the |
|
treadmill for a few minutes. Repeat until the walking |
|
belt is properly tightened. |
|
16
