TURN OFF THE ALARM
When the alarm activate, press the ‘POWER/AL.OFF’ button to turn off the alarm.
SNOOZE FUNCTION
1.Whenever the alarm activate, it can be temporarily suspended for a short period of 10 minutes by pressing the ‘SNOOZE’ button on the unit or the ‘SLEEP/SNOOZE’ button on the remote control.
2.The alarm will then automatically activate again after the 10 minutes SNOOZE period has ended.
3.This procedure can be repeated for up to approximately one hour.
RADIO OPERATION
1.Press the ‘POWER/AL OFF’ button to turn on the unit.
2.Press the ‘FUNC./CL.ADJ’ button to select the FM RADIO mode.
3.Press and hold the ‘SKIP+/TUNE+’ or
4.Use the
5.Press ‘VOL.+’ or
SAVING RADIO STATIONS IN THE MEMORY
Note : If you use this unit in the first time, or after plug off the AC/DC adaptor from a wall outlet, the unit memory number will be starting from ‘P01’.
1.Tune to the desired stations.
2.Press the ‘PROG/MEM’ button on the unit or the ‘MEM’ button on the remote control, the display will show the next memory station number and flash continuously.
3.Press the
4.Repeat step 1 to 3 to store more radio stations in the memory.
5.Up to maximum 20 radio stations can be stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
Use the ‘MEM+/AL2’ or
Press the ‘MEM+/AL2’ button on the unit or the ‘M+’ button on the remote control to skip up to the next station in the memory.
Press the
CD OPERATION
1.Press the ‘POWER/AL OFF’ button to turn on the unit.
2.Press the ‘FUNC/CL.ADJ’ button to select the CD mode.
3.Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the disc, it will play the first track of the entire disc after reading.
4.Press ‘VOL+’ or
5.During playing, press the ‘PLAY/PAUSE/SYNC’ button to temporarily pause playing. To resume, press the ‘PLAY/PAUSE/SYNC’ button again.
6.To stop playing, press the ‘STOP’ button.
Skip Mode
1.During play or pause mode, press the ‘SKIP+/TUNE+’ button to go to the next track.
2.During play, press the
3.In pause mode, press the
Search Mode
1.Press and hold the ‘SKIP+/TUNE+’ or
2.Release the button to return to normal play.
Different Play Mode
Press the
Repeat Repeat All Random Normal
REPEAT - the track being played and will repeat continuously.
REPEAT ALL - the whole disc will repeat continuously.
RANDOM – the tracks in the disc will be played in random sequence.
Programming
The programming should be done during STOP mode
1.Press the ‘PROG/MEM’ button on the unit or the ‘PROG’ button on the remote control, the LCD display will show 01 PROG flash continuously.
2.Use the ‘SKIP+/TUNE+’ or
3.Press the ‘PROG/MEM’ button on the unit or the ‘PROG’ button on the remote control again to store the selected track in the memory, the LCD display will show 02 PROG and flash continuously.
4.Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the memory.
5.Press the ‘PLAY/PAUSE/SYNC’ button to start playing the disc in the programmed order.
6.To stop playing, press the ‘STOP’ button.
7.To cancel the programming list, press the ‘STOP’ button and open the CD compartment door or select a different function RADIO, AUX or iPod/iPhone.
- 6 - | - 7 - |