Troubleshooting

Before go through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer.

No power

- The car ignition switch is not on.

If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”.

-The fuse is blown. ● Replace the fuse.

Disc cannot be loaded or ejected

-Presence of CD disc inside the player.

● Remove the disc in the player, and then put a new one.

-Inserting the disc in reverse direction.

Insert the compact disc with the label facing upward.

-Compact disc is extremely dirty or detective disc.

● Clean the disc or try to play a new one.

-Temperature inside the car is too high. ● Cool off or until the ambient tempera- ture return to normal.

-Condensation.

Leave the player off for an hour or so, and then try again.

No sound

- Volume is in minimum.

● Adjust volume to a desired level.

-Wiring is not properly connected. ● Check wiring connection.

Sound skips

-The installation angle is more than 30 degree.

● Adjust the installation angle less than 30 degree.

-The disc is extremely dirty or defective disc.

Clean the compact disc, and then try to play a new one.

The operation keys do not work

-The built-in microcomputer is not operating properly due to noise. ● Press the RESET button.

Front panel is not properly fixed into its place.

The radio does not Work.

The radio station automatic selection does not work.

-The antenna cable is not connected. ● Insert the antenna cable firmly.

-The signals are too weak.

● Select a station manually.

9

Page 11
Image 11
PYLE Audio PLCD21 No power, Disc cannot be loaded or ejected, No sound, Sound skips, Operation keys do not work