2.The unit cannot play a
3.Depending on the recording status, conditions of the disc and the equipment used for the recording, some
*1: To have more reliable play back, please see following recommendations:
A.Use
B.Use
C.Do not play a
C. Handling and Cleaning
-Dirt, dust, scratches and warping discs will cause disoperation.
-Do not place stickers or make scratches on discs.
-Do not warp discs.
-A disc should always be kept in its case when not in use to prevent from damage.
-Do not place discs in the following Places:
1.Direct sunlight.
2.Dirty, dusty and damp areas.
3.Near car heaters.
4.On the seats or dashboard.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc is quite dirty, Use a soft cloth slightly moistures with isopropyl (rubbing) alcohol. Never use solvents such as benzene, thinner or conventional record cleaners as they may mar the surface of the disc.
Note:
A disc may become somewhat scratched (although not enough to make it unusable) depending on the way it is handled and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
D. Preparing New Discs with Rough
Spots
A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ballpoint pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.
7
