General Operation

TURNING THE UNIT ON/OFF Turning on the Player

After all connections are completed correctly, Press power button on the front panel to turn on the power. When the unit is on, it will search the disc automatically. If there is a disc in the disc slot, the unit will start playback automatically.

Turning off the Player

When the power is on press power button on the front panel or on the remote control to turn off the power.

AV output Type Selection

Slide AV OUTPUT TYPE switch on the back of the unit left or right to select A or B.

When the switch is slid to A side, the AV OUTPUT 1 and AV OUTPUT 2 are both under the control of the MODE button on the remote control or on the front panel of the unit, i.e. the signal output may be any one of the DVD, AV INPUT 1 and AV INPUT 2 signal source.

When the switch is slid to B side, the AV OUTPUT 1 just outputs the AV INPUT 1 signal and it doesn’t under the control of the MODE button or SOURCE button.

But the signal output from the AV OUTPUT 2 is under the control of the MODE button on the remote control or on the front panel of the unit.

Remote Sensor (IR)

Point the remote handset to the remote sensor IR on the DVD unit. Receive the signal from remote handset.

Loading a Disc

Insert the disc into the disc slot with the printed side facing up, the player will play the disc automatically.

Removing a Disc

When the disc stops playing, press eject button on the front panel to eject the disc.

BASIC PLAY

Stopping Playback

-Shortly press button on the front panel or on the remote control one time to pre-stop the unit playback. When / button on the front panel or on the remote control is pressed, normal

playback will continue.

-Press button twice to stop the playback and go back to the DVD LOGO.

Pausing Play/Step Play

Pressing on the front panel or on the remote control during playback will stop playback temporarily. To return to normal playback, press on the remote control or on the front panel.

If you play a DVD/VCD/SVCD, press on the remote control again to stop at the next picture (step function). If you play a CD/MP3/Picture CD, pressing on the remote control again is ineffective.

Rapid Forward / Rapid Reverse Press & during playback. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follows.