PYLE Audio PLDVD168 owner manual Mute, Equalization, Liquid Crystal Display, Select Stations

BASIC OPERATION

Volume

Adjust volume level by using VOL+ (12) and VOL- (11) buttons. Note:The unit is initially set to volume mode.

Bass

Press SEL button (10) one time. Adjust bass level by using VOL+(12) and VOL-(11) buttons.

Treble

Press SEL button (10) two times. Adjust treble level by using VOL+(12) and VOL-(11) buttons.

Balance

Press SEL button (10) three times. Adjust sound balance between left and right speakers by using VOL+(12) and VOL-(11) buttons.

Fader

Press SEL button (10) four times. Adjust sound balance between front and rear speakers by using VOL+(12) and VOL-(11) buttons.

MUTE

Press MU button (4) to mute down sound. Press it again to release this mode and recover previous volume level.

SELECT MODE

Press MOD button (9) to change between radio or disc mode.

EQUALIZATION

Press EQ button (5) to turn to equalization function and to select desired audio mode. There are four kinds of mode as below:

FLAT CLAS ROCK POP NO EQ

LIQUID CRYSTAL DISPLAY

The LCD can show the current state of the unit

SKIP TRACKS

Press button (19) or button (18) to the previous track or the following track. Track number shows on the display.

SELECT STATIONS

Press and release button (19) or button (18) immediately to move radio frequency number down or up on step.

Press and hold button (19) or button (18) for several seconds to seek the next clear station.

FAST FORWARD AND FAST REVERSE

Press button (19) or button (18) to fast reverse or fast forward. CD play starts from when you release the button.

12