BASIC OPERATION
FLASHING LED
If the front panel is not on the main unit, LED (16) will be flashing.
RESET BUTTON FUNCTION
RESET button (17) is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button (17) is to be activated for the following reasons:
Note: If press RESET button (17), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RADIO OPERATION
BAND
Press BND button (8) to change bands as below:
| FM |
| MW |
| LW |
|
|
| FM |
| MW |
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| ||||
| For 3 Bands (Europe) | For 2 Bands (Europe) | ||||||||||
FM 
AM
For 2 Bands (USA)
SELECT STATION
Rotate TUNING knob (3) clockwise or anticlockwise to adjust the frequency upward or downward.
LOCAL/DISTANT
Press the LOC button (1) to select between local setting for reception of strong station and distant setting for reception of weak stations when tuning.
MONO/STEREO
In FM band, press MON button (7) to select mono or stereo reception for radio stations. You can sometimes improve reception of distant stations by selecting mono operation.
DISC OPERATION
Most of the disc operations are controlled by the remote controller.
Ejecting a Disc
Press (EJECT) button (15) on the front panel or 
button on the remote control to eject the disc.
13
