INSTALLATION
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow these mounting instructions.
Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
Side View showing
Screw Holes marked
T, N
Screw
Factory Radio
Mounting Bracket
Screw
Hook | Dashboard or Console |
To fasten the unit to the factory radio mounting brackets.
1.Use a screwdriver to loose the hook's screws on the front left and right sides of the unit and remove the hooks.
2.Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm)on each side.
Note: the outer trim ring, sleeve
and the metal strap are not used
for method B installation.
8
