REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1.Open the battery compartment cover.
2.Insert the new battery. Make sure that the positive and negative terminals of the battery are oriented as indicated.
3.Close the cover.
Battery: a button cell lithium battery (CR2025 3V)
Using the Remote Control
Point the remote control towards the player front face remote sensor RX (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the remote sensor.
LOADING/EJECTING A DISC
Loading a Disc
When all connections have completed, you can load a disc as follow:
1.Turn the ignition on to the accessory position.
2.Press the PWR button (1) on the front panel or POWER button on the remote control to turn on the unit.
3.Insert the disc with printed side facing up into the disc slot (2).
4.The player starts playback automatically.
2 | 3 | 1 |
Ejecting a Disc
Press 
(EJ) button (3) on the front panel or 
(EJECT) button on remote control to eject the disc.
14
