07Preparation
Using the remote control unit
Use the remote control unit by pointing it towards the remote sensor window. Objects between the remote control unit and sensor window may prevent proper operation.
Cautions regarding the remote control unit
•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humid- ity.
•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.
•The remote control unit may not work properly if the remote sensor window of the Plasma Display is under direct sunlight or strong lighting. In such case, change the angle of the lighting or Plasma Display set, or operate the remote control unit closer to the remote sensor window.
22
En
Inserting batteries
If the remote control unit fails to operate Plasma Display System functions, replace the batteries in the remote control unit.
1Open the battery cover.
2Insert the two AA size batteries supplied with the product.
•Place batteries with their terminals corresponding to the (+) and
3Close the battery cover.
22 | 7/24/03, 1:58 PM |
