Useful Features

13

Learning function of the remote control unit

You can operate the connected AV products (AV Re- ceiver, Cable Box, SAT tuner, VCR, DVD, DVD recorder, LD) using the learning function of your remote control unit. This remote control unit has a function that can memorize each remote control code.

2 to 5 cm (0.8 to 2.0 inches)

To exit the Edit mode halfway, press EDIT/LEARN again.

If the Mode switch selection is changed when in the Edit mode, the Edit mode is cancelled.

If no operation is performed for more than one minute, the Edit mode is cancelled.

When you enter a code not listed, the LED flashes quickly.

If the table on page 99 does not include your desired manufacturer or the remote control does not work, you can make the memory learn its signal by the Learn mode.

The initial mode is “000” (PIONEER).

English

Remote control

Remote control of

(Supplied accessory)

AV product

Presetting manufacture codes

1Slide the Mode switch to match the device to which you want to preset the remote control signal.

2Press EDIT/LEARN and 1 at the same time.

The LED flashes.

3Press 0 9 to enter the manufacture code. See page 99.

Preset mode is finished once the LED no longer lights up.

97

En

PDP5040HD-Eng (97-105)

97

7/24/03, 2:01 PM

Page 97
Image 97
Pioneer PDP 4340HD, PDP 5040HD Useful Features, Learning function of the remote control unit, Presetting manufacture codes