Preparation
Connecting a VHF/UHF antenna and Cable Converter
VHF antenna | UHF antenna | Media Receiver (rear) |
07
English
U/V mixer
Cable TV 
Cable Converter
I N | I N |
OUT | OUT |
A ANTENNA/CABLE B
•Be sure to connect the antenna or the Cable Converter as shown above. Signal reception may fail if not properly connected.
•Be sure that the Cable Converter output signal is assigned to the ANTENNA/CABLE B input on the Media Receiver.
•How to change channels when the Cable Converter output signal is connected to the ANTENNA/CABLE B input on the Media Receiver.
•Press ANT on the remote control unit to switch to
ANTENNA/CABLE B.
•You can view an image right after selecting the output channel on the Cable Converter.
Switching between tuner A and B
To watch broadcasts via the two tuners, you can select it by pressing ANT on the remote control unit.
•While watching a broadcast, press ANT to view the image received from the other tuner.
•Pressing ANT while viewing in Dual Screen mode (TV image and video image) with TV selected will display the TV image of the other tuner.
•Pressing ANT while viewing Dual Screen with two TV images displayed will not have any effect.
•Pressing ANT while viewing Dual Screen with two video images displayed will switch the selected screen to a TV image.
When making the above connections, first remove the coaxial cable attached before shipment.
25
En
25 | 7/24/03, 1:58 PM |
