Basic Adjustment Settings | 09 |
No Operation off
The system will be automatically placed into the standby mode when no operation is performed for three hours.
1Press HOME MENU.
2Press 
/
to select “Power Control”, and then press ENTER.
3Press 
/
to select “No Operation off”, and then press ENTER.
4Press 
/
to select “Enable”, and then press
ENTER.
Power Control for PC source
Power Management
The system will be automatically placed into the standby mode when no signal is received from the personal computer.
1Press HOME MENU.
2Press 
/
to select “Power Control”, and then press ENTER.
3Press 
/
to select “Power Management”, and then press ENTER.
4Press 
/
to select “Mode 1”or”Mode 2”, and then press ENTER.
English
Item | Description |
Disable | Does not place the system into the |
(factory default) standby mode. | |
|
|
Enable | Places the system into the standby mode if |
| no operation is performed for three hours. |
|
|
5Press HOME MENU to exit the menu.
•Five minutes before the system is placed into the standby mode, a message appears every minute.
Item | Description |
Off | No power management |
(factory default) |
|
|
|
Mode 1 | • Places the system into the standby mode |
| when no signal is received from the |
| personal computer for eight minutes. |
| • Even when you start using the computer |
| and a signal is received again, the system |
| stays off. |
| • The system is switched on again by |
| pressing STANDBY/ON on the Plasma |
| Display or TVa on the remote control |
| unit. |
|
|
Mode 2 | • Places the system into the standby mode |
| when no signal is received for eight |
| seconds. |
| • When you start using the computer and |
| a signal is received again, the system is |
| switched on. |
| • The system is switched on again by |
| pressing STANDBY/ON on the Plasma |
| Display or TVa on the remote control |
| unit. |
|
|
5Press HOME MENU to exit the menu.
55
En
55 | 7/24/03, 1:59 PM |
