Pioneer PDP 4340HD, PDP 5040HD manual Setting up for controlling a D-VHS recorder, Press Home Menu

Enjoying through External Equipment 11

Setting up for controlling a D-VHS recorder

You can operate the connected D-VHS recorder from the Plasma Display that shows the control panel screen. After making the connections, use the menu to specify the model of the D-VHS recorder to be operated. You can operate only a single D-VHS recorder from the Plasma Display.

1Press HOME MENU.

2Press / to select “DTV Setup”, and then press

ENTER.

3Press / to select “i.LINK Setup”, and then press ENTER.

4Press / to select “i.LINK List”, and then press

ENTER.

•The list of the registered D-VHS recorders (i.LINK list) appears.

5Press / to select the D-VHS recorder model to

be operated, and then press ENTER.

English

6 Press / to select “Connect”, and then press

ENTER.

7Press HOME MENU to exit the menu.

•The following information appears at the right end of the i.LINK list to indicate the connection status of the D-VHS recorders:

Control: Data connection with the D-VHS recorder has been established and the recorder is ready for control.

Connected: The D-VHS recorder has been physi- cally connected, and can be controlled if it is selected for control.

Other: Equipment other than a D-VHS re- corder has been physically connected and thus cannot be controlled.

—:Currently not physically connected

73

En

PDP5040HD-Eng (65-80) 73 7/24/03, 2:00 PM