10Electronic Program Guide (EPG) (for DTV Only)
Setting the timer manually
Using the menu, you can also preset digital TV pro- grams by specifying their scheduled date and time.
1Press HOME MENU.
2Press 
/
to select “Rec/View Timer”, and then press ENTER.
• The schedule table appears.
3Press 
/
to select a list number, then press 
.
• You can select any desired list number.
4Press 
/
to specify a date, and then press 
.
5Press 
/
to specify the start hour, and then press 
.
6Press 
/
to specify the start minute, and then press 
.
7Press 
/
to specify the end hour, and then press 
.
8Press 
/
to specify the end minute, and then press 
.
9Press 
/
to specify a channel number, and then press 
.
10 Press 
/
to select “VIEW”, “ANALOG” or a D- VHS recorder, and then press ENTER.
•Select “VIEW” when presetting the program for auto channel select. Select “ANALOG” when presetting it for recording via a VCR controller. Select a
•In the Info field, “View OK” appears when presetting for auto channel select is accepted, and “Rec OK” appears when presetting for recording is accepted.
11 If presetting another program, press 
/
to select another list number, and then repeat steps 4 to 6.
• You can preset up to 28 programs.
12 Press HOME MENU to exit the menu.
•If the schedule of the selected program is overlapped with another presetting, “Overlapped” appears in the Info field. Presettigs with “Overlapped” may not be partially or entirely executed.
•When entering into the schedule table, pressing ENTER causes the cursor to jump to an empty field.
•Presetting becomes ineffective if the start time and the end time are identical or if presetting operations are performed within two minutes before the start of the program.
•Presettings made using the EPG are automatically shown in the schedule table.
•For presetting made using the EPG, “E” appears beside the channel number in the schedule table. If you alter the presetting content, “E” disappears.
•For priorities about overlapped presettings, see “Priority rules for overlapped presettings” on page 63.
•If you switch off the system using the POWER button, the program presetting will become ineffective. Be careful not to switch off the power.
62
En
62 | 7/24/03, 2:00 PM |
