Pioneer PDP 4340HD, PDP 5040HD manual Freezing images

Basic Operations 08

1Press SPLIT to select the display mode.

•Each time you press SPLIT, the display mode is switched among 2-screen, picture-in-picture, and single-screen.

2When in the 2-screen or picture-in-picture mode, press / to select a screen to be active.

•“z” appears on the active screen, which outputs sound.

3To select the desired input source, press the appropriate input source button.

•If watching TV programs, press CH +/– to change the channel.

•The multiscreen function cannot display images from the same input source at the same time. If you make such an attempt, a warning message appears.

•When you press HOME MENU, DTV GUIDE, or DTV INFO, the single-screen mode is restored and the corresponding menu is displayed.

Freezing images

Use the following procedure to capture and freeze one frame from a moving image that you are watching.

1Press FREEZE.

•A still image appears on the right screen while a moving image is shown on the left screen.

2Press FREEZE again to cancel the function.

•With the screen split, any image cannot be frozen.

•When this function is not available, a warning mes- sage appears.

English

37

En

PDP5040HD-Eng (28-37) 37 7/24/03, 1:58 PM