PYLE Audio PLTV165 owner manual Inch TFT Display, Reset Function, TV Operation, Menu Function

OPERATION

Notes:

The external remote receiver is placed near the monitor for the best to receiver remote signal easily.

If the angle of the monitor from vertical exceeds 200 (Especially the distance exceeds 3m.), controlling the TV through IR (3) or (13) cannot get good effect. You are suggested to use the external remote receiver.

6.5 inch TFT DISPLAY

When the monitor stretches out, the 6.5 inch color TFT display (6) can show the current state of the unit.

RESET FUNCTION

Reset button (7) must be activated with either a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons:

Initial installation of the unit when all wiring is completed.

All the function buttons do not operate.

Error symbol on the display.

Note: When the monitor stretches out and on the central viewing position, activate the reset button (7), the monitor will turn downward and draw in automatically.

TV OPERATION

When the monitor stretches out, you can operate the unit by using the current menu displayed on the 6.5 inch color TFT display (6).

Selecting receiving mode

In TV mode, press TV/AV button (11) on the monitor panel or TV/AV button

(19)on the remote control to select among TV/ AV1/AV2/RGB. The corresponding state will show on the TFT display (5).

Selecting channel

Press CHANNEL button (14) on the front panel or CHANNEL^

(26)button on remote control to choose channel upward and or

Press CHANNEL button (15) or CHANNEL (27) button on remote control to choose channel downward.

The numeric buttons (0,1~9) (20) allow you to select the corresponding channel directly. Press digital select button (-/--) () cooperatively used with numeric buttons to select channel desired. For example, when you want select 16 channel, press -/-- (28) to switch between "-" and "--", when the "--" appears on the display, you can press "1" button then press "6" button to select 16 channel.

Menu Function

Press MENU button (10) on the front panel or MENU button (30) on the remote control, the menu will show on the display (6).

(For the unit with NTSC system):

MENU

Press CHANNEL/ (14&15) on the front panel or CHANNEL ^/ ^ buttons (26&27) on the remote control to select the item upward or downward. Then press VOLUME/ (8&9) on the front panel or VOLUME^/^ buttons (24&25) on the remote control to adjust the selected item. The corresponding value will show on the display.

11