OPERATION
SWITCHING ON/OFF THE UNIT
Switch on the unit by pressing POWER button (1) on the front panel or POWER button (17) on the remote control. When system is on, press it again to turn the unit off.
OPEN/CLOSE THE MONITOR AND ANGLE ADJUSTMENT
Press OPEN/CLOSE button (2) on the front panel or point the remote control to IR (3) on the front panel and press OPEN/CLOSE button (18), the monitor will stretch automatically.
OPEN/CLOSE button
Fig.1
When the monitor stretches to a certain location, it will turn upward automatically and stop at vertical position.
Fig.2
Adjusting the viewing angle.
When the monitor doesn't move, you can press ANGLE+ button (21) or ANGLE button (22) on the remote control to turn the monitor upward or downward at fine steps to get a desired viewing angle. And you can rotate the monitor left and right from the central viewing position at a certain angle range manually.
Don't rotate the monitor forcibly to avoid mechanical damage.
Fig.3
Return the monitor to the central viewing position, then press OPEN/CLOSE button (2) on the front panel or press OPEN/CLOSE button (18) on the remote control, the monitor will turn downward automatically.
Fig.4
When the monitor turns downward to a certain angle, it will draw in.
Fig.5
REMOTE SENSOR
There is a remote sensor IR (3) on the front panel. On the monitor, there is another remote sensor IR (13) to receive remote control signal. You can point the remote control handset to IR (3) (when the monitor doesn't stretch out) or IR (13) (when the monitor stretches out) and press function keys on the remote control to control the TV unit.
The unit is also connected to an external remote receiver (See the electrical connection diagrams on Page 7), and the function is the same with IR (3) and (13).
10
